Sunyani Technical University STU Admission Forms

Sunyani Technical University STU Admission Forms

Admission forms for Sunyani Technical University is not out at the moment, kindly check back shortly on our homepage for admission and recruitment updates In Ghana.

Admissions for Sunyani Technical University starts in the first quarter of the year therefore applicants are advised to make all their documents and requirements ready before the admission begins.

Check below for previous admission requirements and the checklist for Sunyani Technical University.

STU Application Guide for 2024 Admission

INSTRUCTIONS

1. Pay for your ONLINE admission application form at any of the following:
   a. SUNYANI TECHNICAL UNIVERSITY CAMPUS
   b. POST OFFICES
   d. FIDELITY BANK
   e. ZENITH BANK
   g. ECOBANK
2. Applicants applying for programmes that does not require a certificate should contact the Registrar, Sunyani Technical University
   directly or on phone before buying the form – ( Contact Phone number: 03520 27052/24924)
3. Pay for your online application form and collect your SERIAL NUMBER and PIN CODE.
   The SERIAL NUMBER and PIN CODE would also be sent to your phone through a text message.
   Remember to provide a valid phone number and ensure your phone is active when paying for your form
   to enable you receive a text message containing the SERIAL NUMBER and PIN CODE for your application.
4. LOGIN using your SERIAL NUMBER and the PIN CODE.
5. It takes three (3) steps to complete the Online admission Application form.
6. STEP 1: Select Programmes of choice, provide your personal information and
   previous schools attended. You would be required to upload an electronic passport
   picture (jpg, pjeg, png or gif formats).
7. STEP 2: Provide details of relevant certificates obtained, employment history
   (Compulsory for Mature applicants) and sponsor’s information.
8. STEP 3: SUBMIT and PRINT the completed application form. You are also to Print
   and complete the DECLARATION FORM
9. After each step, Click SAVE AND CONTINUE button to save and go to the next STEP.
10. You can LOGOUT and continue later till you SUBMIT your form.
    (NOTE: Non Submitted application forms would not be processed)
11. After STEP 2, you can SUBMIT your admission application form.
    (NOTE: After submitting your application, NO CORRECTIONS can be done by applicants)
12. Remember to make your phone active while processing your form to enable you receive
    the appropriate message after submitting your application form. You are requested to send the following documents to : THE REGISTRAR SUNYANI TECHNICAL UNIVERSITY P. O. BOX 206 SUNYANI B/A a. A printed copy of the submitted application form
    b. A printed and completed copy of a Declaration form
    c. Photocopies of Certificates/Results slips and all other relevant documents

Sunyani Technical University Entry Requirements

DEGREE PROGRAMMES

•Bachelor of Technology (B-Tech) Degree in Building Technology (In Collaboration with Kwame Nkrumah University of Science and Technology) (Regular and Weekend) (18 months top-up)

Entry Requirements

o. Applicants must hold a good HND (Second Class Upper Division or Better) in Building Technology or allied programmes with at least two years relevant post HND qualification experience. Applicants with HND Second Class Lower Division must pass a selection interview before they could be considered. The programme duration is 18 months consisting of 3 semesters.

o. To be eligible for admission to the Pre-B-Tech programme, candidates are required to have one of the following qualifications:

i.CTCIII Certificate Part III (CTCIII – New Scheme) or

ii.CTCIII Certificate Part III (CTCII – Old Scheme).

•Bachelor of Technology (B-Tech) Degree in Accounting With Computing (Regular and Weekend) (18 months top-up)

Entry Requirements

a. HND Accountancy Applicants

Holders of HND Accountancy Certificate

b. ACCA and ICA Applicants

Applicants with 7 passes or more papers of ICAG, ACCA, CIMA or equivalents c. Advanced Diploma in Computerised Accounting

Holders of Professional Diploma in Computerised Accounting with credit passes (SSSCE A- D), WASSCE (A1 C6) in the three core papers of English Language, Core Mathematics and Social

Studies/Integrated Science or Equivalent from a recognized Tertiary Institution

d.First Degree

Applicants holding NAB Accredited degrees will be interviewed. The programme duration is 18 months consisting of 3 semesters.

•Bachelor of Technology (B-Tech) Degree in Procurement Management (Regular and Weekend) (2 years top-up)

Entry Requirements

A candidate must have an HND with second class division or better and satisfy all conditions that the Technical University will require.

a.A candidate must have an HND in Purchasing and Supply, Procurement Supply Chain Management, Logistics, Freight Forwarding, Stores Management, etc; or its equivalent.

b.Applicants with Diploma in Procurement & Supply from the Chartered Institute of Purchasing & Supply (CIPS UK) qualification may apply.

c.HND Graduates from other fields or disciplines with a qualification not lower than a minimum of 2nd Class Lower Division with at least five (5) years working experience in procurement related fields.

d.First degree graduates from other fields or discipline may apply.

•Bachelor of Technology (B-Tech) Degree in Hospitality Management (Regular and Weekend) (2 years top-up)

Entry Requirements

HND graduates of Hospitality management and students transferring from similar Programmes run at other institutions with a minimum of 2nd Class Lower and must have had two years working experience, qualify to apply. Admission would be based on an interview performance.

Additionally, HND Hospitality graduates who are 30 years and above but do not satisfy the above class requirements may also apply.

•Bachelor of Technology (B-Tech) Degree in Civil Engineering (Regular and Weekend) (2 years top-up)

Entry Requirements

The entry requirements for the programme is an HND (Civil Engineering) certificate or allied programmes and a minimum of two years industrial experience. Preference would be given to first and second class upper holders.

•First degree graduates from other fields or discipline may apply.

•Bachelor of Technology (B-Tech) Degree in Management and Entrepreneurial Studies (Regular and Weekend) (2 years top-up)

Entry Requirements

i)Applicants must have qualification in HND Secretaryship and Management Studies, Purchasing and Supply, Accountancy or Marketing, as well as students transferring from similar programmes, run at other institutions with accreditation/recognition and with a minimum qualification of Second (2nd) Class Lower Division plus at least two (2) years relevant post qualification experience in the relevant field.

OR

HND Secretaryship and Management Studies, Purchasing and Supply, Accountancy, and Marketing graduates possessing lower than the minimum Second (2nd) Class Division requirement as indicated above, but have worked in relevant fields for a minimum of two (2) years may apply. Applicants in this category will be admitted based on interview performance.

OR

Other HND graduates possessing lower than the minimum Second (2nd) Class Division requirement as indicated above, but have worked in relevant fields for a minimum of two (2) years may apply. Applicants in this category will be admitted based on interview performance.

•Bachelor of Technology (B-Tech) Degree in Marketing Management (Regular and Weekend)

(2 years top-up)

Entry Requirements

i.Graduates of Higher National Diploma in Marketing and students transferring from similar programmes ran at other accredited/recognized institution with a minimum of second class lower division plus at least one (1) year working experience/ first degree from any recognized institution

ii.HND graduates from other fields or disciplines with a Qualification lower than the minimum second class lower but have worked in relevant fields for at least one year

•Bachelor of Technology (B-Tech) Degree in Electrical/Electronic Engineering (Regular and Weekend) (2 years top-up)

Entry Requirements

(i)The B-Tech degree programme is a top-up programme designed for holders of the Higher National Diploma (HND) Certificate in Electrical and Electronic Engineering or related field. To be eligible for the B-Tech in Electrical/ Electronic Engineering programme, candidates must hold a good HND certificate (Second Class Upper Division or better) with two years relevant post-qualification experience. Candidates with second class lower division must pass a selection interview to be conducted by the Technical University in additional to two years post qualification experience in a relevant field.

(ii)Electrical Technicians Course Part III or Part II old scheme holders with four (4) or three

(3)credit passes including Electrical Principle, Electrical Regulations, Electrical Practical and Electrical Drawing plus four (4) G. C. E ‘O’ Level passes (English, Mathematics) and any other two subject

OR

(iii)Final Electrical Technicians Course as stated above plus two (2) or more credit passes of SSCE/WASSCE (SHS) (English and Mathematics).

Applicants admitted based on entry requirements (ii and ii) are supposed to go through some bridging course or Pre – BTech programme organized by the department and pass the stipulated courses before enrolled fully on the BTech programme.

•Bachelor of Technology (B-Tech) Degree in Mechanical Engineering (Regular and Weekend)

(2 years top-up)

Entry Requirements

(i)The B. Tech degree programme is a top-up programme designed for holders of the Higher National Diploma (HND) Certificate in Mechanical Engineering or related field. To be eligible for the B. Tech in Mechanical Engineering programme, candidates must hold a good HND certificate (Second Class Upper Division or better) with two years relevant post-qualification experience. Candidates with second class lower division must pass a selection interview to be conducted by the Technical University in addition to two years post qualification experience in a relevant field.

(iv)Mechanical/Motor Technicians Course Part III or Part II old scheme holders with four

(4) or three (3) credit passes in the relevant courses plus four (4) G. C. E ‘O’ Level passes (English, Mathematics) and any other two subject

OR

(v)Mechanical/Motor Technicians Course as stated above plus two (2) or more credit passes of SSCE/WASSCE (SHS) (English and Mathematics).

Applicants admitted based on entry requirements (ii and iii) are supposed to go through some bridging course or Pre – B. Tech. programme organized by the department and pass the stipulated courses before enrolled fully on the B. Tech. programme.

•Bachelor of Technology (B-Tech) Degree in Agriculture (Regular and Weekend) (2 years top-

up)

Entry Requirements

To be eligible for admission to the Bachelor of Technology in Agriculture programme, candidates shall obtain the following qualifications:

i.Higher National Diploma (HND) in Agriculture or another equivalent certificate in related areas

ii.Obtain a minimum of Second Class Lower Division

iii.Worked in an agricultural industry or any other related industry for two years

iv.Pass an interview conducted by the Technical University

v.Work experience may be waived for exceptional students with agricultural Science background and a minimum Cumulative Grade Point Average (CGPA) of 3.0 (Second Class Upper Division).

HND PROGRAMMES

FACULTY OF BUSINESS AND MANAGEMENT STUDIES

•HND Accountancy (Regular, Weekend and Evening)

•HND Computerised Accounting (Regular, Weekend and Evening)

•HND Marketing (Regular, Weekend and Evening)

•HND Purchasing and Supply Chain Management (Regular, Weekend and Evening)

•HND Secretaryship and Management Studies (Regular, Weekend and Evening)

FACULTY OF ENGINEERING

•HND Civil Engineering

•HND Electrical/Electronic Engineering (Computer Engineering Option)

•HND Electrical/Electronic Engineering (Medical Engineering Technology Option)

•HND Electrical/Electronic Engineering (Power Systems Option)

•HND Electrical/Electronic Engineering (Telecommunication Options)

•HND Materials Engineering

•HND Mechanical Engineering (Automobile Option)

•HND Mechanical Engineering (Plant Option)

•HND Mechanical Engineering (Production Option)

•HND Mechanical Engineering (Refrigeration and Air-Conditioning Option)

FACULTY OF BUILT ENVIRONMENT AND APPLIED ARTS

•HND Building Technology

•HND Ceramic Arts

•HND Fashion Design Technology

•HND Textiles Technology

•HND Interior Design and Technology

FACULTY OF APPLIED SCIENCES AND TECHNOLOGY

•HND Computer Science

•HND Pharmacy Technician

•HND General Agriculture

•HND Hotel, Catering and Institutional Management (Regular, Weekend and Evening)

•HND Information and Communication Technology (ICT)

ADMISSION ELIGIBILTY FOR HND PROGRAMMES

Admission is opened to:

i.SSSCE holders with credit passes (A-D) in English Language, Mathematics and Integrated Science/Social Studies plus credit passes (A-D) in Three Elective subjects relevant to the programme of study

ii.WASSCE holders with credit passes (A1-D7) in English Language, Mathematics and Integrated Science/Social Studies plus credit passes (A1-C6) in Three Elective subjects relevant to the programme of study

iii.CERTIFICATE II HOLDERS: Certificate II Applicants with Passes in six (6) subjects comprising three (3) core subjects (English, Mathematics and Integrated Science/Social Studies) plus three (3) passes in relevant elective subjects are eligible for HND Programmes

iv.ADVANCED LEVEL holders with credit in at least Five (5) subjects at the GCE ‘O’ Level

(or its equivalent) including English and Mathematics, plus at least two passes in the subjects relevant to the programme of study.Mature Candidates Entrance Examination will take place

v.TECHNICAL SCHOOLS APPLICANTS: Technical School applicants with Passes in English Language, Mathematics, Integrated Science plus three (3) relevant elective subjects.

vi.POST SECONDARY TEACHER TRAIN ING CERTIFICATE APPLICANTS: Passes at the final

Post–Secondary Teacher Training Examination plus five passes at the GCE O’Level/SSSCE/WASSCE including English and Mathematics.

vii.DIPOMA IN BUSINESS STUDIES (DBS) APPLICANTS: Applicants who hold DBS with Distinction or Credit from GES accredited institutions are eligible for admission to level 200 to pursue Business related programmes at the HND level. DBS applicants who hold a Pass would enroll at level 100. In all cases applicants would be required to have four (4) credit passes in WASSCE/SSSCE/ RSA II including English and Mathematics.

viii.MATURE APPLICANTS

a.Must be at least 25 years old.

b.Must have at least two (2) years relevant industrial experience.

c.Must pass a written examination and an interview.

d.Must show proof of date of birth with any national document which is at least 5 years old at the time of application.

OR

a.Must be at least 25 years old

b.Must have at least two (2) years relevant industrial experience.

c.Must show proof of credit passes in English Language and Mathematics in

SSSCE/WASSCE

d.Must show proof of date of birth with any national document which is at least 5 years old at the time of application.

MATURE CANDIDATES ENTRANCE EXAMINATION

Note: All mature candidates will be expected to pay an additional amount of GH¢50.00 on or before the day of the entrance examination at the Technical University Campus. This amount covers the cost of the entrance examinations.

on Friday, July 28, 2023 at the Sunyani Technical University. The starting time for the examination is 10:00 a.m. prompt.

PRE-HND (ACCESS) COURSE FOR TECHNICAL AND VOCATIONAL SCHOOL STUDENTS

The National Board for Professional and Technicians Examinations (NABPTEX) has designed an access programme for Technical/Vocational Institute graduates into HND programmes. NABPTEX will conduct a final external examination after which successful applicants shall proceed to enroll in the following HND programmes:

▪HND Building Technology

▪HND Civil Engineering

▪HND Computer Science

▪HND Electrical/Electronic Engineering

▪HND General Agriculture

▪HND Hotel, Catering and Institutional Management

▪HND Ceramic Arts

▪HND Fashion Design Technology

▪HND Textiles Technology

▪HND Interior Design Technology

▪HND Pharmacy Technician

▪HND Materials Engineering

▪HND Mechanical Engineering

▪

ENTRY REQUIREMENTS FOR PRE-HND COURSES

Applicants should posses a minimum qualification of Intermediate Certificate or its equivalent in the relevant area of study.

ACCESS PROGRAMME FOR SSSCE/WASSCE

In the case of SSSCE/WASSCE Science applicants for Access course, they must have passes in three

(3)subjects comprising at least one (1) core subject plus at least one (1) science elective subject and any other science related subject.

PROFESSIONAL PROGRAMMES

PROFESSIONAL DIPLOMA IN COMPUTERISED ACCOUNTING

Entry Requirements

Diploma in Computerised Accounting

INSTITUTE OF CHARTERED ACCOUNTANTS (ICA) GHANA – PART 1

Entry Requirements

a. SSSCE /WASSCE APPLICANTS: 6 Passes in with at least aggregate 20 and including English Language and Mathematics.

b. GBCE APPLICANTS (RSA) – Six GBCE passes including English Language, Business Mathematics, with at least aggregate 20.

THE ACCOUNTING TECHNICIANS SCHEME WEST AFRICA (ATSWA) FORMERLY GAT

Entry Requirements for HND Programmes

a. SSSCE /WASSCE APPLICANTS: 6 Passes in with at least aggregate 20 and including English Language and Mathematics.

b. GBCE APPLICANTS (RSA) – Six GBCE passes including English Language, Business Mathematics, with at least aggregate 20.

CHARTERED INSTITUTE OF BANKERS (GH) LEVEL 1 – 4

Entry Requirements for HND Programmes

(i)School Certificate (6 credits) or GCE ‘O” level with 6 credit in English Language and mathematics, Plus “A” level in 3 subject, 2 which should not be below grade D.

(ii)WASSCE or SSSCE; 3 core Subjects including Core Mathematics and core English plus 3 Elective from either (1) Business Programme or (2) General Arts Programme (Economics, Government, Science & Mathematics).

(iii)Minimum 5 Credit passes at the General Business certificate Exam including English Language and Mathematics plus 3 passes at the advanced Business Certificate Exam.

(iv)Any other equivalent professional certificate

DEPARTMENT OF PROCUREMENT AND SUPPLY CHAIN MANAGEMENT

In collaboration with

THE CHARTERED INSTITUTE OF LOGISTICS AND TRANSPORT (CILT)

Is pleased to invite prospective applicants to enroll on the:

INTERNATIONAL CERTIFICATE / DIPLOMA/ ADVANCED DIPLOMA IN LOGISTICS AND

TRANSPORT PROGRAMMES

General Objective:

The courses aim at equipping participants with the knowledge and skills to manage Logistics, Transport and general Supply Chain operations in their respective organizations.

Specific Objectives:

Among other objectives, the participants will be able to:

•Professionally manage Inventories and Warehouse Operations

•Evaluate financing options for Transport acquisition and Operations

•Effectively handle Goods and Services Distribution

•Appreciate the strategic role of Logistics and Transport in the organization’s operations

Target Group

This course is designed for senior managers, middle line managers and supervisors working in the field of Logistics and Transport, Freight Forwarders, personnel in Supply and Transport department in Government Institutions, the Armed Forces, Police, Fire Service and CEPS. The others are Warehousing and Stores Managers, Airline Workers, Shipping Companies Workers and other Professionals who want to pursue a career in Logistics and Transport Operations and Management.

Benefits of the course include the following:

•An opportunity to join and qualify for membership of the world’s most established professional body for Logistics, Transport and Supply Chain with post nominal such as

MILT, CMILT

•Participation in Continuous Professional Developments (CPDs) offered by CILT to its members.

Course Content:

(A)INTERNATIONAL CERTIFICATE IN LOGISTICS AND TRANSPORT – CILT

This is a modular programme designed to increase core skills and knowledge and build the confidence to improve personally and professionally.

Candidates must successfully complete four (4) modules through examinations (3 compulsory and 1 optional)

•Compulsory Modules:

Module A – Supply Chain Operations

Module B – Business Theory

Module C – Business Applications

•Optional Modules:

1.	Warehousing	5. Freight Operations
2.	Port Operations	6. Procurement
3.	Transport Planning	7. Inventory
4.	Global Logistics	8. Passenger Transport Op

Entry Requirements:

To qualify for this program, participants ought to have been educated up to Senior High School (SHS), GCE Ordinary or Advanced Levels with a minimum of credit passes; or equivalent professional qualifications.

Mature Entry Exams will be taken by applicants who are 27years and above but do not meet the academic qualification for only the certificate level.

(B)INTERNATIONAL DIPLOMA IN LOGISTICS AND TRANSPORT – DILT

Candidates must successfully complete five (5) modules through examinations (2 compulsory + 1 elective + 2 optional) or (2 compulsory + 2 elective + 1 optional)

•Compulsory –1.Management in Logistics and Transport

2.Supply Chain Management

•Electives – 1.Transport Planning

2.Transport Operations

•Optional –

1. Inventory	6. Warehousing
2.	Movement of Goods	7. Supply Chain Flow Planning
3.	Movement of People	8.International Business/Global Logistics
4.	Retail Logistics	9. Supply Chain Network Planning
5. Sourcing and Procurement	10. Transport and Society

Entry Requirements:

•Possession of the International Certificate in Logistics and Transport of the Chartered Institute of Logistics and Transport or

•Possession of a University First Degree and/or HND (or equivalencies) coupled with relevant areas of study

•In addition, participants must have worked in a Logistics and Transport environment for a minimum of three years.

(C)INTERNATIONAL ADVANCED DIPLOMA IN LOGISTICS AND TRANSPORT – ADILT

The Advanced Diploma aims to give senior managers and leader’s strategic management and decision-making skills to enable them to aspire to the highest levels of management. The Advanced Diploma also includes organizational planning. Participants are expected to become familiar with analytical concepts and to use them in their management role. They will be aware of ethical issues, sustainability and global environmental issues.

Candidates must successfully complete five (5) Compulsory Modules

1.Strategic Contexts

2.Leadership and Strategic Management

3.Strategic Network Planning

4.Delivery Strategic Performance

5.Research Methods and Professional Projects

Entry Requirements:

•Possession of the International Diploma in Logistics and Transport of the Chartered Institute of Logistics and Transport or

•First Degree/Masters in Logistics, Supply Chain, Transport or Procurement related discipline with any accredited institution.

•In addition, participants must have worked in a Logistics and Transport environment for a minimum of three years.

DIPLOMA PROGRAMMES

1.Diploma in Computerised Accounting (DCA) (2-year Programme)

2.Diploma in Banking Technology & Accounting (DBTA) (2-year Programme)

3.Diploma in Electronic Marketing (2-year Programme)

4.Diploma in Business Administration (2-year Programme)

5.Diploma in Public Relations (2-year Programme)

6.Diploma in Procurement & Materials Management (2-year Programme)

7.Diploma in Business Studies (Accounting Option) (1-year Programme)

8.Diploma in Business Studies (Secretarial Option) (1-year Programme)

9.Diploma in Business Studies (Management Option) (1-year Programme)

10.Diploma in Business Studies (Marketing Option) (1-year Programme)

11.Diploma in Business Studies (Purchasing and Supply Option) (1-year Programme)

12.Diploma in Business Studies (Statistics Option) (1-year Programme)

Entry Requirements for 1 – 6: Five (5) SSSCE/ WASSCE passes including English Language and Mathematics/ GBCE passes.

Entry Requirements for 7 – 12 : Four (4) SSSCE/ WASSCE passes including English Language and Mathematics/ GBCE passes.

TECHNICIAN AND ADVANCED PROGRAMMES

•Construction Technicians Course (CTC) Part I

•Construction Technicians Course (CTC) Part II

•Construction Technicians Course (CTC) Part III

•Electrical Engineering Technicians (EET) Part I

•Electrical Engineering Technicians (EET) Part II

•Electrical Engineering Technicians (EET) Part III

•Mechanical Engineering Technicians (MET) Part I

•Mechanical Engineering Technicians (MET) Part II

•Mechanical Engineering Technicians Part III

•Motor Vehicle Technicians (MVT) Part I

•Motor Vehicle Technicians (MVT) Part II

•Motor Vehicle Technicians Part III (MVT III)

•Advanced Blocklaying and Concreting

•Advanced Carpentry and Joinery

•Advanced Cookery (8122)

•Advanced Furniture

•Advanced Painting and Decorating

•Advanced Fashion and Designing

•Advanced Furniture Design & Construction

Entry Requirements

Passes in Intermediate, SSSCE/WASSCE, Part I and Part II of that particular programme.

CRAFT PROGRAMMES/COUNCIL FOR TECHNICAL AND VOCATIONAL EDUCATION AND TRAINING (COTVET) PROGRAMMES

The Technical University also runs programmes of the Council for Technical and Vocational Education and Training (COTVET) at the Certificate II and Advanced levels. The programmes are:

•Agric Mechanics Work

•Autobody Inter/COTVET

•Blocklaying and Concreting Inter/COTVET

•Catering Inter/COTVET

•Electrical Installation Work

• Electrical Machine Rewinding and Repairs

•Fabrication and Welding

•Fashion and Designing Intermediate

•Furniture Craft Inter/COTVET

•General Textiles

•Heavy Duty and Diesel Mechanics

•Industrial Maintenance Technology

•Industrial Mechanics

•Mechanical Engineering Craft Practice

•Motor Vehicle Mechanics Work

•Painting and Decorating Inter

•Refrigeration & Air-conditioning Mechanics

•Small Engines Repairs

•Textiles Technician

Entry Requirements

•SSSCE/WASSCE and JHS certificates

OTHER PROGRAMMES

General Business Certificate Examination (Formerly Ghana Commercial Examinations or RSA Stage II)

Entry Requirements

•SSSCE/WASSCE and JHS certificates

Advanced Business Certificate Examination (Formerly Ghana Commercial Examinations or RSA Stage III)

Entry Requirements

•RSA Stage II

PROFICIENCY CERTIFICATES

•Architectural and Engineering Draughtmanship

•Proficiency in Chinese Language

•Proficiency in English Language

•Proficiency in French Language

SALES OUTLET

Prospective Applicants must purchase Sunyani Technical University ADMISSIONS FORMS from the following centres:

1.The Finance Office, Sunyani Technical University

2.Regional and District POST OFFICES throughout the country

3.Fidelity Bank, Zenith Bank, Ghana Commercial Bank, Ecobank, Stanbic Bank, Sunyani and all other Branches throughout the Country.

COST OF APPLICATION FORMS

i.

i.	Bachelor of Technology Applicants	– GH¢130.00
ii.	HND Programmes (Direct Applicants)	– GH¢120.00
iii.	HND Programmes (Mature)	– GH¢130.00

iv.Access (Pre-HND), Diploma, Technician and Advanced Programmes – GH¢120.00

v.	Craft programmes and Proficiency Certificates – GH¢80.00

HOW TO APPLY

ONLINE ADMISSION INSTRUCTIONS

1.Go to admissions.stu.edu.gh on the internet after you have purchased the Sunyani Technical University admissions documents

2.Log onto the Online Admissions system with the E-Voucher Number and Pin

3.Follow steps on the Online Admissions system to complete your application

4.A printed copy of your completed online application must be enclosed in your envelope before posting together with photocopies of Certificates or Results slips to be returned to: The Registrar, Sunyani Technical University, P. O. Box 206, Sunyani

COMPLETED FORM

A completed ADMISSION FORM should be sent to the Post Office together with photocopies of certificates or result slips and in the case of Mature Applicants, birth certificates or JHS Certificate should also be attached and sent to the address below:

THE REGISTRAR,

SUNYANI TECHNICAL UNIVERSITY,

P.O. BOX 206,

SUNYANI – B/A

For general enquiries contact the Senior Assistant Registrar in charge of Admissions on : 0352027052 / 0352023278 OR 0264485858 / 0209189632 / 0209172257 / 0246883567 / 0503117976