By | 20 November 2017

Koforidua Technical University KTU Admission Forms

2024/2025 Admission forms for Koforidua Technical University is not out at the moment, kindly check back shortly on our homepage for admission and recruitment updates In Ghana.

Admissions for Koforidua Technical University starts in the first quarter of the year therefore applicants are advised to make all their documents and requirements ready before the admission begins.

Check below for previous admission requirements and checklist for Koforidua Technical University.

MODE OF APPLICATION

Applicants can only apply online via the Koforidua Technical University online application portal. The procedure is as follows:

  1. Ghanaian Applicants for HND and Non-HND programmes are to make a payment of One Hundred and Fifty Ghana Cedis (GH¢150.00) and B’Tech applicants are to make a payment of One Hundred and Sixty Ghana Cedis (GH₵160.00) for the Koforidua Technical University On-line Serial Numbers (OSN) E-Vouchers at Koforidua Technical University Campus – Cash Office or at any Republic Bank, Agricultural Development Bank (ADB), Ghana Commercial Bank (GCB), Universal Merchant Bank, Prudential Bank, Fidelity Bank branches throughout the country.
  2. Foreign Applicants can purchase On-line Serial Numbers (OSN) E-Vouchers online by visiting www.ktu.edu.gh/applyonline using any VISA Card enabled for online purchase at the cost ($50.00).
  3. Applicants can also purchase admission voucher with MTN Short Code by dialling *700*88# and follow the procedure below:
  • Enter Name or Alias of Institution (eg. Koforidua Technical University or KTU)
  • Select the specific voucher to purchase. (The name and the amount are displayed)
  • Enter MoMo PIN to Authorize payment
  • The voucher will be sent via SMS
  • when the voucher is received, you may proceed to the next instruction (4.)
  1. Access the Online forms by visiting our online application portal at http://applyonline.ktu.edu.gh after payment.
  2. When completing the on-line forms, applicants will be required to upload their passport size photographs and result slips/certificates. Note: Photographs must be on a white background.
  3. Applicants awaiting results are eligible to apply.

Online applications should be submitted not later than, 2nd October 2024. However, the deadline for mature applications is July 3, 2024

Available Koforidua Technical University Courses/Programmes

A) BACHELOR OF TECHNOLOGY PROGRAMMES

  1. Bachelor of Technology in Accounting (2-year Top-Up Programme)
  2. Bachelor of Technology in Procurement and Supply Chain Management (2-year Top-Up Programme)
  3. Bachelor of Secretaryship and Management Studies (2-year Top Programme)
  4. Bachelor of Technology in Marketing (18 Months Top-Up Programme)
  5. Bachelor of Technology in Automotive Engineering (2-year Top-Up Programme)
  6. Bachelor of Technology in Civil Engineering (2-year Top-Up Programme)
  7. Bachelor of Technology in Renewable Energy Systems Engineering (2-year Top-Up Programme)
  8. 8. Bachelor of Technology in Telecommunication Engineering (2-year Top-Up Programme)
  9. Bachelor of Technology in Mechanical Engineering (2-year Top-Up Programme)
  10. Bachelor of Technology in Building Technology (2-year Top-Up Programme)
  11. Bachelor of Technology in Hospitality and Tourism Management (2-year Top-Up programmes)

B) HIGHER NATIONAL DIPLOMA PROGRAMMES -3YRS (REGULAR, EVENING AND WEEKENDS)

  1. HND Accountancy
  2. HND Marketing
  3. HND Purchasing & Supply
  4. HND Secretaryship & Management Studies
  5. HND Automotive Engineering
  6. HND Civil Engineering
  7. HND Electrical/Electronics Engineering
  8. HND Mechanical Engineering
  9. HND Renewable Energy Systems Engineering
  10. HND Statistics
  11. HND Computer Science
  12. HND Network Management
  13. HND Hospitality Management
  14. HND Food Technology
  15. HND Postharvest Technology
  16. HND Building Technology
  17. HND Environmental Management and Technology
  18. HND Biomedical Engineering Technology
  19. HND Medical Laboratory Sciences

C) TERTIARY DIPLOMA PROGRAMME

  1. Diploma in Public Administration Morning and Weekend

D) NON TERTIARY PROGRAMMES

  1. Diploma in Business Studies (DBS) (Accounting Option)
  2. Diploma in Business Studies (DBS) (Secretaryship Option)
  3. Diploma in Business Studies (DBS) (Management Option)
  4. Diploma in Business Studies (DBS) (Marketing Option)
  5. Diploma in Business Studies (DBS) (Purchasing & Supply Option)
  6. Diploma in Business Studies (DBS) (Banking & Finance Option)
  7. Diploma in Business Studies (DBS) (Entrepreneurship Option)
  8. Diploma in Business Studies (DBS) (Statistics Option)
  9. Diploma in Business Studies (DBS) (Information Technology Option)
  10. Electrical Engineering Technician Part I
  11. Motor Vehicle Technician Part I
  12. Certificate II in Fashion Design and Textiles
  13. Advanced Fashion Design and Textiles
  14. Catering Certificate I &II
  15. Construction Technician Certificate Part I.

E) ACCESS COURSE/PRE-HND PROGRAMME

The National Board for Professional and Technicians Examinations (NABPTEX) has designed an access course for Technical/Vocational Institute graduates into HND Programmes. NABPTEX will conduct a final external examination after which successful applicants shall proceed to enrol in the under listed

AVAILABLE PROGRAMMES:

  1. Automotive Engineering
  2. Mechanical Engineering
  3. Electrical/Electronics Engineering
  4. Renewable Energy Systems Engineering
  5. Civil Engineering
  6. Building Technology
  7. Hospitality Management

F) PROFESSIONAL PROGRAMMES

  1. Institute of Chartered Accountants (ICA) (Ghana):-Levels I – III
  2. Association of Chartered and Certified Accountants (ACCA) (UK):-F I – P5
  3. Chartered Institute of Management Accountants (CIMA): Levels I – III
  4. Chartered Institute of Bankers (CIB) (Ghana):-Levels I – IV
  5. Chartered Institute of Purchasing and Supply (CIPS) (UK):- Levels I – VI

G) CERTIFICATE PROGRAMME IN SMALL AND MEDIUM ENTERPRISES – 3 MONTHS (SATURDAYS ONLY)

  1. Applicants with a minimum of Junior High School Certificate
  2. Mature Applicants must be at least twenty-five (25) years old and must have relevant working experience.

Bachelor Of Technology (BTech)

GENERAL REQUIREMENTS FOR BACHELOR OF TECHNOLOGY PROGRAMMES

  1. Holders of Higher National Diploma in a specified field obtained from accredited/recognized institutions with a minimum of Second Class Lower Division
  2. Holders of Higher National Diploma in a particular field transferring from similar programmes run at accredited/recognized institutions with a minimum of Second Class Lower Division should have a one (1) year working experience.
  3. Holders of University Diploma certificates from accredited Universities and Professional Diploma certificates are eligible to apply
  4. Other qualifications that are equivalent to Higher National Diploma, Construction Technicians Certificate III & II), (CTC III (New)), CTC II (Old) , Mechanical Engineering Technician III (MET III), Electrical Engineering Technician III (EET III), Advance Diploma among others).

Diploma In Public Administration (DPA)

ENTRY REQUIREMENTS FOR DIPLOMA IN PUBLIC ADMINISTRATION

  • Five (5) SSSCE/WASSCE passes (Including English Language and Mathematics) or
  • Five (5) GCE O-Level passes (Including English Language and Mathematics) or
  • Five (5) GBCE (RSA II) passes (Including English Language and Mathematics) or
  • Mature Applicants must be twenty-five (25) years old and must show proof of age with birth certificate or any legitimate documentary proof of date of birth which is five (5) years old at the time of application. And must pass a written test in English Language, Mathematics and General Knowledge to be conducted by the Koforidua Technical University.

Higher National Diploma (HND)

GENERAL ENTRY REQUIREMENTS FOR HND PROGRAMMES

  1. SSSCE/WASSCE APPLICANTS
  • SSSCE Candidates: Passes (A-D) in three (3) core subjects namely English Language, Mathematics and Integrated Science/Social Studies; and must possess a minimum of D in any three (3) of the passes relevant to the area of specialization.
  • WASSCE Candidates: Passes (A-D7) in three (3) core subjects namely English Language, Mathematics and Integrated Science/Social Studies; and must possess a minimum of C6 in any three (3) of the passes relevant to the area of specialization.
  • Alternatively, SSSCE/WASSCE Applicants with passes (A-D)/(A1-C6) in three core subjects namely English Language, Mathematics and Integrated Science/Social Studies; and a minimum of D/C6 in any two (2) of the passes relevant to the area of specialization are eligible to apply.
  • Applicants must be twenty-five (25) years old at the time of application and must show proof of age with birth certificate or any legitimate documentary proof of date of birth which should be five (5) years old at the time of application.
    Must pass a written test in English Language, Mathematics and General Knowledge to be conducted by Koforidua Technical University.
  • Mature applicants’ class and entrance examinations have been scheduled as follows:
  1. Classes: July 4, 5, 11 &12, 2020
  2. Entrance Examinations: Saturday, July 19, 2022

The class and entrance examinations would be held at Koforidua Technical University main campus. Please come along with birth certificates. Deadline for mature applications is July 3, 2024.

Non-Hnd Programmes (DBS)

ENTRY REQUIREMENTS

  • DBS–(Accounting/ Management/Marketing/Purchasing & Supply/ Entrepreneurship/ Secretarial Options)
    1. Four (4) SSSCE/WASSCE passes (including English and Mathematics) Or
    2. Four (4) GCE O-Level passes (including English Language and Mathematics) Or
    3. Four (4) GBCE (RSA II) passes (including English Language & Business Mathematics) Or
    4. NACVET/NVTI Typist/ 2 or 3 passes in Stenographer Certificate (for Secretarial option)
  • DBS–(Statistics and Information Technology Options)
    1. Four (4) SSSCE/WASSCE passes (including English, Mathematics plus elective Mathematics or Physics) Or
    2. Four (4) GCE O-Level passes (including English Language and Mathematics, additional Mathematics or Physics)
  • Certificate II in Fashion Design and Textiles:-2-Years
    1. Passes in SSSCE/WASSCE/GBCE/’O’ Level subjects.
    2. National Vocational Training Institute (NVTI) Fashion Certificate Grade I or Grade II or equivalent.
    3. Junior High School Graduates with knowledge and skills in Dressmaking
  • Advanced Fashion Design and Textiles:-2-Year
    1. Holders of City and Guilds Certificate in Fashion & Designing (Dressmaking and Tailoring) Or
    2. Intermediate Dressmaking/Fashion Certificate plus at least one (1) year relevant practical experience Or
    3. Four (4) passes in SSSCE/WASSCE subjects including English Language, Mathematics and any other elective subjects plus basic knowledge and skills in Dressmaking Or
    4. Four (4) passes in GCE ‘O’ Level including English Language Mathematics plus knowledge in Dressmaking.
  • Construction Technician Certificate (CTC) Part I
    1. Four (4) SSSCE/WASSCE passes including English, Mathematics and Technical Drawing.
    2. Technical Construction option Subjects: Craft (B/C, C/J, P/D, and Plumbing) and Advanced (B/C, C/J, P/D, and Plumbing.)
    3. Passes in General Course in Construction (GCC)
  • Mechanical Engineering Technician (MET) Part I
    1. Four (4) SSSCE/WASSCE passes including English, Mathematics and Science
    2. Technical Option Subjects :Engineering Crafts, Intermediate General Engineering (GE), MECP
    3. Technical Option Subjects: MVM, Intermediate General Engineering (GE)
  • Electrical Engineering Technician (EET) Part I
    1. Four (4) SSSCE/WASSCE passes including English, Mathematics and Science and any two of the following – Applied Electricity/Electronics, Physics, Mathematics.
  • Catering Certificate II (formerly Cookery 812/1)- 2years
    1. Passes in relevant SSSCE/WASSCE/GBCE/ GCE O-Level subjects.
    2. NVTI Grade II or JHS Certificate with working experience.

Pre-HND/Access Programme

ENTRY REQUIREMENTS

  1. Applicants must have a minimum of Craft Course. Or
  2. Applicants must have MET I, MVT I and EET I or its equivalent. Or
  3. Applicants should have a minimum qualification of Intermediate or Craft Certificate or its equivalent from a recognized examinations body. With regards to Hospitality Management, applicants must have Cookery 812/2.